Product Center
Heavy load open gear grease
Product Introduction
This product is made of high viscosity mineral oiland synthetic oil as the base ol, composite soap as the thickening agent, adding aditives such as
extreme pressure agent, anti-friction agent, viscosifier, antioxidant and anti-rust agent.
Product advantages
Excellent anti-wear, extreme pressure performance, can meet the needs of high load conditions.
Excellent adhesion performance, can be attached to the gear surface to form a tough lubrication film.
Excellent low temperature performance, can meet the requirements of centralized lubrication.
Has good anti-rust performance, can have a certain protective effect on the tooth surface.
Typical Data
| PROJECT | TYPICAL PRODUCT DATA | TEST METHOD | |
| 000# | TH400 | ||
| Appearance | Black uniform ointment | Visualization | |
| Working cone penetration,0.1mm | 454 | 462 | GB/T 269 |
| Dropping point，℃ | 185 | 187 | GB/T 3498 |
| corrosion (45 steel sheet, 100 'c.3h) | Qualified | SH/T 0331 | |
| Four ball test sintering load PD value/N | 4900 | 4900 | SH/T 0204 |
| Wear resistance (four ball machine method) (75 "c, 1200r/min,392N, 60min) Wear spot diameter/mm | 0.55 | 0.56 | SH/T 0204 |
| Base oil kinematic viscosity(40 “C)mm2/s | 3000 | 4000 | GB/T 265 |
Note: 1. Typical values of product data should not be interpreted as actual measurement data of the product. 2. There may be differences in the measured values between different batches. Please request the quality inspection report for a specific batch of measured data. | |||
| PROJECT | TYPICAL PRODUCT DATA | TEST METHOD |
| TH600 | ||
| Appearance | Black uniform ointment | Visualization |
| Working cone penetration,0.1mm | 446 | GB/T 269 |
| Corrosion(T2 copper sheet,100°C,24h), grade | 1b | GB/T 7326 Method A |
| Extreme pressure performance (sintering load)PD.N | 6226 | SH/T0202 |
| Shear viscosity (Anton Paar)(CP50-1.50/5.40°C) | 6226 | DIN 51810-1 |
| Flow pressure (-5°c).hPa | 1225 | NB/SH/T 0638 |
| Note: 1. Typical values of product data should not be interpreted as actual measurement data of the product. 2. There may be differences in the measured values between different batches. Please request the quality inspection report for a specific batch of measured data. | ||
scope of application
Heavy duty open gear grease 000 #, TH400 product is suitable for large and small open gears of steel ball coal mills in thermal power plants, and is suitable for intermittent spray lubrication. The operating temperature range is 0 ℃~120 ℃.
The TH600 heavy-duty open gear grease product is suitable for heavy-duty large and small open gears of steel ball coal mills, ball mills, and mixers. It is also suitable for lubrication of open lubrication parts of other equipment, such as open gears, steel wire ropes, rollers, slide rails, etc. The operating temperature range is 0 ℃ to 120 ℃.