Product Center
Air compressor oil
Product Introduction
This product is made from deeply refined base oil as raw material, with an appropriate amount of additives such as antioxidant, rust proof, and anti-corrosion. Divided into three viscosity levels based on 40 ℃ motion viscosity: 100, 150, and 220.
Product advantages
Good thermal oxidation stability can effectively reduce carbon deposition, inhibit oil aging, and extend service life.
Good lubrication, rust prevention and corrosion resistance, preventing piston and exhaust valve corrosion and prolonging the service life of compressor components.
Excellent anti emulsification performance, quickly separating from contact water.
High flash point and low volatility.
Typical Data
ITEM | TYPICAL PRODUCT DATA | TEST METHOD | ||
Viscosity grade (GB/T 3141) | 100 | 150 | 220 | |
Kinematic viscosity(40℃)/(mm2/s) | 100.3 | 151.2 | 223.2 | GB/T 265 |
Viscosity index | 114 | 104 | 102 | GB/T 1995 |
Pour point/℃ | -27 | -21 | -15 | GB/T 3535 |
Flash point (opening)/℃ | 268 | 274 | 275 | GB/T 3536 |
Moisture (mass fraction)/% | Trace | Trace | Trace | GB/T 260 |
Copper corrosion (100 ℃, 3h)/level | 1a | 1a | 1a | GB/T 5096 |
scope of application
This product is suitable for piston type and drip oil rotary air compressors with oil lubrication.
precautions
Change the oil according to the recommended oil change interval by the compressor manufacturer.
This product should not be used on chlorine compressors to prevent explosions.
Strictly control the intake temperature, regularly clean the carbon deposits on the exhaust valve and exhaust pipeline, and strictly control the appropriate amount of oil supply. Excessive oil not only causes waste, pollutes compressed gas, but also increases the generation of carbon deposits, and in severe cases, can cause explosions.
During storage and use, do not mix water or impurities.